Authorizing Expansion Packs
Authorizing 2getheraudio Expansion Packs
You must be connected to the internet to authorize 2getheraudio software.
To authorize 2getheraudio expansion packs, first you should instantiate (open) the plug-in that will contain the expansion pack. You can run the standalone application (if there is one for this plug-in) or run the 2getheraudio plug-in in a DAW.
Next, select an expansion preset from the preset menu or click the “E” icon to open the expansion list window.
Locate the expansion pack you wish to authorize and click on the field which says “ENTER YOUR AUTHORIZATION NUMBER”. Type or paste in your authorization number using the “Paste from clipboard” button, and then click the Authorize button.
Authorizing can take up to a few minutes depending on the speed of your internet connection. Please be patient. Once authorization has taken place, the screen will update and tell you it is authorized. If you don’t enter your authorization number correctly an error message will be displayed.
Close the expansion list window using the button in the upper right corner of the window.
Enjoy your new sounds!